Valves interview questions and answers
Introduction to Valves Valves are devices used to control or regulate the flow of liquids, gases, or solids in a system. There are different types depending on the function they perform. Whether you need to start or stop flow, control
Piping and instrumentation diagram
What is P&ID (Piping and Instrumentation Diagram) – A complete guide Basic Introduction of Piping and Instrumentation Diagram A piping and instrumentation diagram (P&ID) is a detailed schematic representation used in process engineering to demonstrate the piping and instrumentation
Roles and Responsibilities of QA/QC Engineers and Inspectors During Oil and Gas Refinery Shutdowns
QA QC Roles and Responsibilities Introduction: In the dynamic world of oil and gas refineries and petrochemicals, shutdowns are critical moments. These planned maintenance periods, also known as shutdowns, are necessary to ensure the safety, efficiency, and reliability of operations.
Mechanical Supervisor and Foreman Roles and Responsibilities in oil&gas shutdown
What is Mechanical Supervisor? A mechanical supervisor in oil and gas is to supervise repair, maintenance and installation work which is performed by technicians and workers. Supervisor make sure that all mechanical tasks are done safely and according to rules.
Distillation Column Maintenance Procedure in Shutdown for Refinery and Petrochemical
DISTILLATION COLUMN OR TOWER WORK SCOPE FOR SHUTDOWN Why is distillation column or tower maintenance important during refinery shutdowns? Distillation columns or towers are vital components in many industrial processes, particularly in oil refineries, chemical plants, and petrochemical facilities.
Vessel Maintenance Procedure in Shutdown for Refinery and Petrochemical
VESSEL WORK SCOPE FOR SHUTDOWN Why is vessel maintenance important during refinery shutdowns? Refineries are complex systems that rely on multiple vessels to process crude oil into different products. However, these vessels are subject to frequent wear and tear due
Popular Post Must Read it…
- Piping Definition And Meaning
- What is difference between Shutdown and Turnaround
- Pipe OD, ID, Circumference, NPS, DN, NB, THK, and SCH Explained
- What is Upstream, Midstream, and Downstream in Oil and Gas Industry
- Difference Between PSV and PRV | PSV | PRV | Pressure Safety Valve | Pre…
- What is Rupture Disk in Piping
- Valves interview questions and answers
- General Fitter or Mechanical Fitter Job in 2023 | Mechanical Fitter or General Fitter Job in Kuwait [2023] | General Fitter or Mechanical Fitter Work
- List of static equipment in oil and gas industry pdf
- [Types] Shell and Tube Heat Exchanger | Types of Heat Exchanger | Different Types of Heat Exchanger