Maintenance of Fin-Fan Air Cooler in Refinery
Arrangement
Before start work
1. To sabse Pahle aapke pass
Work permit honi chahiye
2. Apke pass proper tools
hone chahiye
3. Apko proper PPE jarur
istemal karna chahiye aapke safety ke liye.
4. Aur aaj ham baat kar rhe
h fin-fan ke maintenance ki to ye kaam hame height per rah kar karna hota hai
to Safety harness ka upyog jarur kare.
5. Jarurat ke hisab se
scaffolding erection jarur kra le
6. Equipment me koi fluid ho
ya pressure ho to use bhi drain or release kar le.
7. Aur sabse khas baat ki Blind list ke aadhar per inlet or
outlet ka blinding kar le yaani ki equipment ka positive isolation kaam shuru
karne se pahle jarur kar le.
Let’s Start Steps by Step Maintenance
hammer ring spanners and other hammering methods to remove the plugs because
that will damage the threads )
without damaging the gasket area.
inspection.
good without damage.
damage.
the threads.
to required value.
Test.
Tubes/Plugs.
inspection to the team.
de-Blind.
Question Answer
Questios No1- What are the types of gaskets used in the fin-fan cooler
plugs and material of construction?
Ans- Ring type gaskets are used and material of construction
is soft iron, aluminium, stainless steel
and alloy.
Questio No2- What are the size of plugs used in
fin-fan cooler?
mm) and 1 3/8 (34.9=36 mm) plugs are also used.
Casino de Ville, Ville, Ville, Rennes, France – Mapyro
Information, 거제 출장안마 address, 상주 출장마사지 phone number, map of Casino de Ville, 이천 출장마사지 Ville, 평택 출장마사지 Rennes, 진주 출장마사지 France, on Mapyro.
Thanks for sharing this information. To know more click on Manufacturers of Fully threaded stud bolt in Mumbai